Engine Timing Tool
-
14pcs Interchangeable Belt Tensioner Wrench Set
Item No.:BT2942
*Pulley wrench with 13 interchangeable adaptors suitable for almost all types of vehicles
*Has a long curved handle to make access easy and comes with 13 interchangeable adaptors
*5x Torx:E10,E12,E14,E16,E18
*8x 12-point:12,13,14,15,16,17,18,19mm
-
Euro Stretch Belt Installation Tool
Item No.:BT2943
*Covers many European,Domestic and Asian applications including:BMW,Volvo,Mercedes and Mazda
*Quickly and easily installs stretch belts
*Will not damage stretch belts during installation
*Eliminates the belt tensioner
*Installation can be difficult because if the belt is twisted it can be damaged.This tool prevents that potential damage.
-
VAG Audi 1.8/2.0 4V TSi/TFSi Engine Tool Set
Item No.:BT4100
*Allow removal and replacement of the timing chain & camshaft sprockets on the 1.8/2.0 TFSi&TSi petrol engines commonly found in the Volkswagen Audi Group of vehicles.
*The kit includes the special camshaft pulley locking blocks required for the later generation 3 TFSi/TSi engines.
*Application:
Volkswagen Beetle,Eos,Golf,Passat,CC,Sharan,Tiguan,Scirocco
Audi A3,TT,Q3,A5 sportback
Skoda Octavia,Superb,Yeti
Seat Alhambra,Altea,XL,Leon,Toledo
-
Engine Timing Tools For New Jetta/Santana
Item No.:BT4101
*Set includes crankshaft locating screw,camshaft locking tool,Belt tensioner wrench,Belt pulley wrench.
*Applications:for Santana/Gran Lavida/Golf 7
-
VAG VW/Audi 1.8/2.0 Engine Timing Tool Set
Item No.:BT4108
*Simple blocking,adjusting of camshaft,crankshaft and tension pulley when working on the engine timing e.g. when replacing the timing chain.1.8L and 2.0L FSI and TFSI 16V engine with timing chain from about 2008.
*Application:
Audi A3,A4,A5,A6,Q3,Q5,TT
Seat Leon,Toledo,Altea,Altea XL,Exeo,Alhambra
Skoda Yeti,Octavia II,Octavia III,Superb
Volkswagen Golf,Beetle,Jetta,Scirocco,Eos,Passat,Passat CC,Tiguan,Sharan,Amarok
-
Engine Timing Tool Kit for Jetta,Santana,LAVIDA
Item No.:BT4109
*Engine timing tool kit for domestic cars for New Jetta,Sagitar,LAVIDA and New Santana 1.4,1.4t,1.6
-
Timing Pulley Puller(42-82mm)
Item No.:BT6433
*Designed for removing drive pulleys with face grooves.
Removers a pulley absolutely free of and risk of damage
The tool is adaptable to different pulley diameters,as the legs are adjustable
For removing pulleys with 3,6,9 slots
-
Crank Pulley Holding Vibration Damper Locking Tool VW AUDI 1.8 and 2.0 Petrol
Item No.:BT7001
*Used to hold the pulley still whilst loosening or tightening the pulley fixing bolt
*Specially designed for TFSi/TSi 1.8 & 2.0lt petrol engines found in the VAG ranges
-
Harmonic Damper Balancer Crankshaft Pulley Holder Removal Tool for Honda Acura
Item No.:BT7002
*Break loose the crank shaft pulley/harmonic balancer bolt.
*Designed to properly secure the pulley from relating during R & R of crank bolt.
*The 50mm hex head armature slips past the lightest of spaces and slides right into the center slot on the pulley.
*Then slide the long bar onto the receiving end of the armature and lock it into position with the securing bolt.
-
Audi-VW Belt Pulley Reaction Wrench
Item No.:BT7003
*Designed for locking on water-pump pulley
*Easy loosening of stubborn screws on the water-pump pulley
*1/2″ square driver in the handle to allow extension of tool
*Application:Audi 80/A4,VW Golf,Polo,Passat and etc.
-
41mm Water Pump Wrench
Item No.:BT7004
*Easily adjust and hold the water pump when replacing or adjusting the timing belt,and easy access to timing belt sprocket without interference from vehicle frame
*Works on 1.6L engines in 2004-current Chevrolet Aveo(excluding 2009 with variable timing engines) and 1999-2002 Daewoo Lanos
-
Cranks Crankshaft Pulley Removal Wrench Holder Tool For Honda And Acura Engines
Item No.:BT7011
*Designed with a 4″ Offset for holding the damper when removing and installing the crank bolt on many honda and acura engines.
*Designed with a 50mm outer hex and large center opening to fit impact sockets.
*Use 1/2″ Dr.ratchet of breaker bar to hold the damper in place.
